Touch Screen Kits

Products

LCD Touch Screens
from 15" to 82"
serial or USB connection

PC Touch Screens
Touch screens with integrated PCs
from 6.4" to 82"

Chassis LCD Touch Screens
For integrating in touch screen kiosks and enclosures

Add-on Touch Frames
NextWindow touch screen systems for LCD and plasma displays up to 65"

Touch Screen Kiosks
Complete touch screen kiosks with a full range of peripherals

Interactive Projector Screens
MSSi Interactive GlassVu Optical Rear Projection Touch Screens

Touch Screen Kits
Touch sensors and controllers to convert existing displays to touch screens

Specialist Touch Screens
Privacy sensors, touch pens, vandal-proof touch screens and industrial touch screens

	Touch Screen Kits
	It is possible to convert an existing LCD display into a touch screen by integrating a touch sensor and controller. The process requires the removal of the monitor casing, the bonding of the touch sensor to the TFT panel and the installation and connection of the touch screen controller - see Installation Guide. You will require the following parts: Touch screen sensor - (see ClearTek specification here) Touch screen controller (see specification here) USB cable to connect the controller to the PC, (part no. 7315050) Double-sided touch sensor mounting tape, 9.5 mm x 32.9 M roll (part no. 24736) There are certain factors to consider before attempting touch screen integration.
	Compatibility with the LCD display
	Not all LCD displays can accommodate a sensor and controller, so it is necessary to check with the manufacturer, if the model you wish to convert, is compatible. Many LCD display data-sheets state if the monitor can be converted to touch or not.
	The monitor manufacturer´s warranty
	You may be voiding the LCD display´s warranty by opening the casing. Check with the monitor manufacturer´s local authorized agent first.
	The quantity of displays to be converted
	As there is a minimum order quantity (MOQ) for touch sensors, you will need to be converting a large quantity of displays. The MOQ can be 20, 50 or 100 units, depending on the sensor part no. although smaller quantities can be supplied at more expensive sample pricing.
	Damage to the LCD display
	Opening the monitors casing and installing the touch screen components can damage the display´s electronics. The work should only be conducted by an experienced monitor engineer.
	Touch sensor and controller warranty
	Although the touch sensor and controller are covered by a 5-year warranty for regular usage, the warranty does not cover any damage incurred during installation. These are sensitive electronic components and the integrator should be aware that they are installing them at their own risk. For the correct sensor part number for your display, please contact us by providing the following information: Monitor size e.g. 20.1" Monitor manufacturer, e.g. NEC Monitor model no. e.g. 2080UX Touch sensor required, (Resistive or Capacitive) Quantity required